Used to convert the IO ports of ESP-07 (ESP-12,ESP-12E,ESP12F) to 2.54mm pitch pin headers, so it is easy for beginner to test the module.When you want to use the adapter board with the 3.3v regulator and apply 5v to the board, you also need to desolder the middle SMD resistor on the adapter board.
Used to convert the IO ports of ESP-07 (ESP-12,ESP-12E,ESP12F) to 2.54mm pitch pin headers, so it is easy for beginner to test the module.When you want to use the adapter board with the 3.3v regulator and apply 5v to the board, you also need to desolder the middle SMD resistor on the adapter board.
Before use, the user should first follow these steps:
Firstly, Solder the ESP-07 or other module to the adapter board
Secondly, Solder the 3.3V regulator to the bottom of the adapter board
Thirdly, Solder the 1X8P pin header to the adapter board
Not included ESP8266 Module
Because there is a 3.3v regulator onboard, the range of VCC pin on the adapter board can be 3.3V to 5V.
Be the first to get our updates,
please contact us through one of
following channels.
Alcohol Sensor Gas Sensor Alcohol Detector – OKY3325 