Specification:

1.Calculation of voltage percentage:Battery voltage / (upper limit voltage – lower limit voltage)

2.Up key:Short press to switch the display% and time,long press for 5 seconds to switch the mode

3.Charging mode:IN

4.Discharge mode:OUT

5.OP:Conduction time

6.dOP:Delay on time (0-999 seconds)

7.With FOP in discharge mode:Forced on time (0-10s)

8.L-p:OFF backlight is always on

9.On:The backlight will automatically turn off after 5-10 minutes

10.Weight:58g

Package Including: 

1 * XY-CD60 Battery Charging Controller Module

Description:

• 100% Brand & High Quality
• How It Works:
  1.The metal strips and potato make a simple battery that creates electricity to operate to operate the clock. Each potato works as a device called a electrochemical cell. It converts the chemical energy stored in the metal strips intoelectrucal energy.Two potatoes are needed to make electricity strong enough to run the clock.
  2.A cell works because of the chemical properties of the metals inside (in this case the copper and zinc).The different properties cause tiny particles charged with electricity .
  (called ions) to move between the the two strips of metal. This flow is an electric current. The potato contains the particles that allow the current to flow,but it stops the metals touching.Electric current also flows along the wires between the zinc and copper strips and the clock. This current makes the clock work.
• Put some soft drink into the pots provided.Insert the copper and zice plates into the pots, as shown in the diagram.
  Taking care that the metal pates do not touch each other.The clock should now start to work.
• You may experiment with different liquids like salt water,fruit juices. Or fruit like lemon, ,tomato etc.The fun is unlimited.
• Cup Size: 5.5cm x 5.5cm x 6.8cm – 2.17inch x 2.17inch x 2.68inch.
  Clock Size:6.7cm x 3.2cm x 1.2cm – 2.64inch x 1.26inch x 0.47inch.